Advertisement
PAGE 13
PROGRAMMING
SYSTEM PROGRAMMING - Menu 1
SETTING 4 - HORN TIMING
THE SIREN WILL CHIRP 4 TIMES WHEN SETTING 4 IS SELECTED
CHANGE SETTING 4 -
GOTO SETTING 5 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
DEFAULT SETTING
3 CHIRP
SETTING 5 - AUX CHANNEL OUTPUT
THE SIREN WILL CHIRP 5 TIMES WHEN SETTING 5 IS SELECTED
CHANGE SETTING 5 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 6 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
DEFAULT SETTING
3 CHIRP
SETTING 6 - CAR JACK MODE
THE SIREN WILL CHIRP 6 TIMES WHEN SETTING 6 IS SELECTED
CHANGE SETTING 6 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO TO SETTING 7 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
DEFAULT SETTING
3 CHIRP
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – Long- The Horn output will activate for 50ms when a
function is preformed.
SETS OPTION 2 –Medium - The Horn output will activate for 20ms when
a function is preformed.
SETS OPTION 3 – Short- The Horn output will activate for 10ms when a
function is preformed.
SETS OPTION 1 – Pulsed- The Auxiliary output will activate for .75
seconds.
SETS OPTION 2 – Latched- The Auxiliary output will Latch and stay active
until the ignition is turned on or the channel is selected again.
SETS OPTION 3 – Active- The Auxiliary output will stay active as long as
the button is held. (5 seconds max).
SETS OPTION 1 – Type 1- Car Jack Mode countdown will start if the door
is opened or if the # button is pressed while the ignition is on.
SETS OPTION 2 – Type 2- Car Jack Mode countdown will start each time
the ignition is turned on and if the # button is press while the ignition is on.
SETS OPTION 3 – No Car Jack Mode- Car Jack Mode is disabled.
PRESS
4 CHIRP
4 TIMES
PRESS
5 CHIRP
5 TIMES
PRESS
6 CHIRP
6 TIMES
650 SERIES
INSTALL MANUAL
X4
X5
X6
Advertisement
