Advertisement
650 SERIES
INSTALL MANUAL
Cycle the Ignition Key
ON/OFF ON/OFF ON
(Leaving the key ON)
STEP 2 - SELECT / CHANGE PROGRAM SETTINGS
SETTING 1- IGNITION LOCKS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
CHANGE SETTING 1 -
GOTO SETTING 2 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
DEFAULT SETTING
3 CHIRP
SETTING 2-SIREN CHIRPS
THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
CHANGE SETTING 2 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 3 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
DEFAULT SETTING
3 CHIRP
SETTING 3-DOOR LOCK OPTIONS
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
CHANGE SETTING 3 - PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 3 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
DEFAULT SETTING
3 CHIRP
STEP 1 - ENTER PROGRAM MODE MENU 1
Press and release the
Program Switch 1 time.
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETS OPTION 1 – AUTO-LOCK & UNLOCK ENABLED- The doors will
lock when the key is turned on and unlock the when the key is turned off.
SETS OPTION 2 – AUTO LOCK ONLY ENABLED- The doors will lock
when the key is turned on but will not unlock when te key is turned off.
SETS OPTION 3 – AUTO LOCK DISABLED- The doors will not lock or
unlock when the key is turned on or off.
SETS OPTION 1 – SIREN DISABLED- The siren and will activate with
Panic and Car Finder Mode only.
SETS OPTION 2 – SIREN CHIRPS ONLY- The siren will chirp for all
functions. When the alarm is activated, the siren output will activate.
* SETS OPTION 3 – SIREN OUTPUT- The siren and output will activate
for all functions.
SETS OPTION 1 – DOUBLE UNLOCK & SINGLE UNLOCK- The system
will provide 2 unlock pulses w/unlock and 1 lock pulse w/lock.
SETS OPTION 2 - DOUBLE LOCK & SINGLE UNLOCK- The system will
provide 2 lock pulses w/lock button and 2 unlock pulses w/unlock button.
SETS OPTION 3 – NORMAL OUTPUT- Single output for both the lock and
unlock outputs.
SYSTEM PROGRAMMING - Menu 1
PROGRAMMING
1 CHIRP
Siren will chip to confirm
program mode entered
PRESS
1 CHIRP
1 TIME
PRESS
2 CHIRP
2 TIMES
PRESS
3 CHIRP
3 TIMES
PAGE 10
Press Lock Button on
Remote to Select Menu 1
X1
X2
X3
Advertisement
