Advertisement
PAGE 15
SHOCK SENSOR
SYSTEM PROGRAMMING - Menu 1
SHOCK SENSOR ADJUSTMENTS
1 - ENTER SHOCK SENSOR ADJUSTMENT MODE
+
3 CHIRPS
2 - ADJUSTING SENSOR
Each time the lock button is pressed and released the sensitivity will
Increase by 1 level.
This is confirmed by a series of park light flashes & Siren Chirps
1 Flash / Chirp is the least sensitive setting
10 Flashes / Chirps is the most sensitive setting
Each time the unlock button is pressed and released the sensitivity will
Decrease by 1 level.
This is confirmed by a series of park light flashes & Siren Chirps
1 Flash / Chirp is the least sensitive setting
10 Flashes / Chirps is the most sensitive setting
3 - EXITING SENSOR ADJUSTMENT MODE
Press & HOLD Lock + Unlock buttons at the same time
+
(NOTE: Shock Sensor Adjustment Mode has an auto time out of 8
seconds)
FOR MORE DETAILED INFORMATION ON PROGRAMMING AND
WIRING DIAGRAMS, DOOR LOCK CONFIGURATION AND OTHER
Press & HOLD Lock + Unlock buttons at the same time
Continue to hold for 3-5 seconds Until Siren Chirps 3 times
(Note: System will Arm or Disarm via silent arming prior to
entering adjustment mode)
INFORMATION, PLEASE VISIT
WWW.ULTRASTARTERS.COM/DIAGRAMS
650 SERIES
INSTALL MANUAL
Advertisement
