Application Method - Contec CMS-50f User Manual

B. B. B. a User Manual
C. C. C. a power adapter
D. D. D. a data line
E. E. E. a disk (PC software)
F. F. F. an oximeter probe
6 6 6 Operating Operating Operating Guide Guide Guide
6 6 6 .1 .1 .1 Application Application

Application method

method method
A. A. A. Install the wristband and probe according to the instructions of chapter 4.2, then put the finger
into the probe.
a) a) a) Turn on the device by long pressing the button on the panel.
b) b) b) Do not shake the finger and keep the patient in a stable state during the process.
c) c) c) The data can be read directly from the screen on the measuring interface.
Fingernails and
Fingernails and Fingernails and the
If If If the the alarm the alarm function alarm function is is is on function
probe or or or finger probe finger is is is out finger out
probe out and
（Actual probe may be different with the probe as figure 4,please accept the actual probe with the
B. B. B. Change Change display direction
Change display display direction direction
On the measuring interface,short press the button to enter the clock interface, and then change the
display direction by short pressing the button within 30 seconds.
C. C. C. Enter Enter Enter and and and exit exit exit the the clock the
a) a) a) On the measuring interface, short press the button in order to enter the clock interface, and it will
automatically return to the measuring interface if there is no other operations within 30 seconds.
b) b) b) On the measuring interface, long press the button for about 10 seconds in order to enter the clock
interface, and the device would return to the measuring interface by long pressing the button again.
D. D. D. Pause Pause alarm
Pause alarm alarm
a) a) a) Alarm including the alarm of measure data's going beyond the limits, the alarm of low-voltage,
the alarm of probe or finger's out of position.
the luminescent tube
the luminescent luminescent tube tube should
on, , , the on the the device device will device
and intermittent alarm
and intermittent intermittent alarm alarm will
device ）
clock interface clock interface interface
should should be be be on on on the the same
the same same side.
will provide will provide midium-priority provide midium-priority midium-priority alarm
will occur.
will occur. occur.
Figure 4.
6
side.
side.
alarm signal alarm signal when signal when when