Contec CMS-50f User Manual page 12

a. a. a. When entering the clock setting menu, the menu choice bar would be on the item of "set time",
and the state would always be "no" whenever it enters the clock setting menu on the purpose of
avoiding unexpected changes of time due to improper operation. You can change the state by long
pressing the button, choose "yes" to reset the time, choose "no" to forbid time resetting.
b b b . . .
Short press the button to move the menu choice bar to the parameter that you want to change,
then adjust the data by long pressing the button.
c. c. c. Short press the button to move the menu choice bar to "Exit", then exit the clock setting menu by
long pressing the button. If you have reset the time or date ,when exiting the clock setting menu,
firstly the renewed time and date would be displayed on the screen, then it returns to the main menu;
if you did't reset the time and date , when exiting the clock setting menu, the device would return to
the main menu directly.
d）Real-time
Real-time data Real-time data data transmission transmission setting transmission
Firstly, please install the affiliated software into the computer, and two icons would appear on the
desktop after installation. The icon of "SpO2 "is a program for receiving real-time data which is
shown as figure 8; the icon of "SpO2 Review" is a program for receiving stored data which is shown
as figure 9.
a. a. a. Please connect the device to computer with the affiliated data line , then double click the "SpO2
"icon to start the program.
b. b. b. On the main menu interface, short press the button to move the menu choice bar to"Usb", long
press the button to choose whether transmit the real-time data to computer which displays the data
Synchronously or not, choose "on" to permit transmission , choose "off" to forbid transmission.
c. c. c. When you unplug the data line from computer, there is a dialog box "Save data at view"
appearing on the desktop, in which you can input some patient's basic information.
Figure 7. Clock Setting Menu
setting setting
Figure 8. SpO2 program
9