Changing The Color (Color) (Vs-Dt88V Only); Adjusting The Volume - JVC VS-DT68V Instructions Manual

Basic Operations
Changing the Color (COLOR)
(VS-DT88V only)
(Using the Remote Control)
You can change the color of the illumination on the Unit.
Press the % button to turn on the Sys-
1
tem.
2
Press the COLOR button.
"RANDOM COLOR" appears.
3
Press the or
setting of your choice.
The color changes as follows:
(Blue) (Red)
RANDOM COLOR:
B | R:
(Blue) (Red)
GRADATION:
13
button to select the
The color changes randomly.
The color between blue and
red is selectable in 16 steps
using the > or < button.
The color changes gradually
between blue and red.

Adjusting the Volume

To increase the volume, press the VOLUME + button on the
Remote Control (or the VOL + button on the Unit).
To decrease the volume, press the VOLUME – button on
the Remote Control (or the VOL – button on the Unit).
You can adjust the volume level between 0 and 50.
CAUTION:
• DO NOT turn off the System with the vol-
ume set to an extremely high level; other-
wise a sudden blast of sound could damage
your hearing, speakers and/or headphones
when you turn on the System or start play-
ing any source next time.
REMEMBER you cannot adjust the volume
level while the System is in Standby mode.
Connect a pair of headphones to the PHONES jack. No
sound comes out of the speakers.
Be sure to decrease the volume before connecting or putting
on headphones.
PHONES
PHONES