Creating 3-Dimensional Sound Field-3D Phonic; Presetting Automatic Dvd Video Sound; Increase Level; Changing The Color System And Scanning Mode - JVC DX-T5 Instructions Manual

Creating 3-dimensional Sound
Field—3D Phonic
While playing a disc...
3D PHONIC
ACTION
3D PHONIC
3D PHONIC OFF
On the TV screen
3D ACTION
Suitable for action movies and sports
programs.
3D DRAMA
Creates natural and warm sound. Enjoy
movies in a relaxed mood.
3D THEATER Enjoy sound effects like in a major
theater.

Presetting Automatic DVD Video Sound

Increase Level

The DVD Video sound is sometimes recorded at a lower
level than for other discs and sources. You can set the
increase level for the currently loaded DVD Video, so you
do not have to adjust the volume when you change the
source.
DVD LEVEL1
DVD LEVEL
As the number increases, sound level also increases.
• The initial setting is "DVD LEVEL3."
14
Remote
INFO
ONLY
DRAMA
3D PHONIC
3D PHONIC THEATER
DVD LEVEL2
DVD LEVEL3
Changing the Color System and
Remote
Scanning Mode
ONLY
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the
COMPONENT jacks, you can enjoy a high quality picture
from the built-in DVD player by selecting progressive
scanning mode.
• You can change the setting only while the disc playback is
stopped.
1
Enter the color system setting mode.
4
sec.
SCAN MODE
VFP
2
Select the color system and scanning mode.
L BALANCE R
PAL PROG
NTSC / PAL NTSC or PAL Interlaced scanning. For
a conventional PAL or NTSC TV.
NTSC / PAL NTSC or PAL Progressive scanning.
PROG
For a progressive NTSC or PAL TV.
3
Store the setting.
SET

Changing the Picture Tone

While viewing a playback pictures on the TV, you can select
the preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1
While playing, display VFP setting screen.
SCAN MODE
VFP
INFO
NTSC PAL
NTSC PROG
Remote
ONLY
NORMAL
GAMMA 0
0
BRIGHTNESS
0
CONTRAST
SATURATION 0
TINT 0
SHARPNESS 0
On the TV screen