To Insert A Cd; To Unload A Cd; Basics Of Using The Cd Player - Normal Play - JVC VS-DT68V Instructions Manual

Using the CD Player
The Quickest Way to Start a CD is with the One
Touch Operation
I Press the CD SELECT 3¥8 button on the Remote Con-
trol.
• The power is automatically turned on. If a CD is
already inserted, it will start playing from the first
track.
• If no CD is inserted, "CD NO DISC" appears on the
display and the CD Player remains in Stop mode.

To Insert a CD

Press the % button.
1
(When the Unit is placed vertically)
The Panel opens automatically.
(When the Unit is placed horizontally)
To open the Panel, press the 0 button on the Unit or the
OPEN/CLOSE button on the Remote Control.
2
Insert a CD into the loading slot, with its
label side front or up as shown below.
SOURCE PREV. VOL
COMPACT COMPONENT SYSTEM
Label side (when the Unit
is placed vertically)
I An 8 cm CD cannot be played back in this Unit. (Do not
attempt to insert an 8 cm CD using an adapter. Doing so
will damage the Unit.)
I If the CD cannot be read correctly (because it is scratched
or loaded upside down, for example), "CANNOT PLAY"
appears on the display.
I You can insert a CD while listening to the other source.
CAUTIONS:
• DO NOT try to open or close the Panel by
hands as it will be damaged. Press the
OPEN/CLOSE button on the Remote Con-
trol to open or close the Panel.
• DO NOT try to insert another CD when a CD
has been already loaded in the Unit. Doing
so will damage the CDs and the Unit.
• DO NOT apply any shock to the Panel when
it is open.
• DO NOT clean the Panel when it is open.
19
Label side (when the Unit
is placed horizontally)
SYSTEM COMPONENT COMPACT
SOURCE PRESET VOL

To Unload a CD

(Using the Unit)
Press the 0 button to unload a CD. The CD is unloaded
automatically, then take out the CD.
SOURCE PREV. VOL
COMPACT COMPONENT SYSTEM
(when the Unit is placed
vertically)
Basics of Using the CD Player
— Normal Play
• The display explained here is for digital audio CDs.
When a video CD is played, "VCD" will appear instead
of "CD".
1
Insert a CD.
Press the CD SELECT 3/8 button on the
2
Remote Control (or the SELECT 3/8
button on the Unit).
The first track of the CD begins playing.
Track number
• The CD Player automatically stops when the last
track of the CD has finished playing.
To stop playing the CD, press the 7 button.
The following information for the CD appears.
Total track number
To stop playing and remove the CD, press the 0 but-
ton on the Unit.
To pause, press the CD SELECT 3¥8 button on the Re-
mote Control or the SELECT 3¥8 button on the Unit. The
playback time blinks on the display.
To cancel pause, press the same button again. Play con-
tinues from the point where it was paused.
(when the Unit is placed
horizontally)
SYSTEM COMPONENT COMPACT
SOURCE PRESET VOL
Playback time
Total playback time