Troubleshooting - JVC VS-DT68V Instructions Manual

Troubleshooting

• If you are having a problem with your System, check this
list for a possible solution before calling for service.
Symptom
No sound is heard.
Poor radio reception.
The CD skips.
The CD does not play.
The disc readout time is too long.
Unable to operate the Remote Control.
Noise is generated.
The image on the TV screen is distorted.
The picture of the video CD is distorted.
Operations are disabled.
"CD NO DISC" appears.
"CANNOT PLAY" appears.
The characters and symbols on the display
appear upside down.
31
• If you cannot solve the problem from the hints given
here, or the System has been physically damaged, call a
qualified person, such as your dealer, for service.
Possible Cause
• Connections are incorrect, or loose.
• Headphones are connected.
• The antenna is disconnected.
• The AM Loop Antenna is too close to the
System.
• The FM Wire Antenna is not properly
extended and positioned.
The CD is dirty or scratched.
• The CD is upside down.
• No MP3 files are recorded on the disc.
• MP3 files do not have the extension code
—.MP3, .Mp3, .mP3, or .mp3.
• MP3 files are not recorded in the format
compliant with ISO 9660 Level 1 or
Level 2.
The readout time varies with the complexity
of the recording configuration.
• The path between the Remote Control
and the sensor on the Unit is blocked.
• The batteries have lost their charge.
You are playing a compatible disc including
non-MP3 files. While playing a non-MP3
file, you will hear a noise. (Note it may not
be an MP3 file although it has the extension
code —.MP3, .Mp3, .mP3, or .mp3.)
TV system is not matching.
When you pause or skip the track, the
pictures will be distorted.
The built-in microprocessor has
malfunctioned due to external electrical
interference.
There is no disc loaded.
• The CD-R or CD-RW that hasn't yet been
finalized (including blank discs) has been
inserted.
• The disc has been inserted with its label
side down.
• An incompatible MP3 disc has been
inserted. Some MP3 discs may not be
played back because of their disc
characteristics, damage or strains.
The DISP.SET switch on the rear panel of
the Center Unit has not been set correctly.
Action
• Check all connections and make
corrections. (See pages 3 to 8.)
• Disconnect the headphones.
• Reconnect the antenna securely.
• Change the position and direction of the
AM Loop Antenna.
• Extend FM Wire Antenna to the best
reception position.
Clean or replace the CD.
• Put the CD in with the label side up.
• Replace the disc.
• Check if all the files on the disc have the
extension code —.MP3, .Mp3, .mP3, or
.mp3.
• Insert a CD-R or CD-RW that is recorded
in MP3 format compliant with ISO 9660
Level 1 or Level 2.
Do not use too many hierarchies and directo-
ries when recording. Also, do not record any
other types of audio tracks together with
MP3 files. (See page 18.)
• Remove the obstruction.
• Replace the batteries.
Insert a compatible disc that is not including
non-MP3 files.
Select the correct TV system. (See page 22.)
This is not a malfunction.
Unplug the System then plug it back in.
Insert a disc.
• Insert a CD-R or CD-RW that has been
finalized.
• Remove the disc and insert it with the
label side front or up. (See page 19.)
• Insert a compatible MP3 disc.
Set the DISP.SET switch correctly.
(See page 10.)