Using The Timers; Setting The Clock - JVC VS-DT2000 Instructions Manual

Using the Timers

1 2
4
5
7 8
10
+
BASS
SET
MD/AUX
FM/AM DISPLAY DIMMER
CLOCK OPEN/
COLOR /TIMER CLOSE
CLOCK
/TIMER
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The timers let you control listening functions automatically.

Setting the Clock

(Using the Remote Control)
• When you plug the AC power cord into the wall outlet,
the time indication "0:00" blinks on the display.
• The clock must be correctly set for the timers to work.
Press the % % % button. %
1
CLOCK
/TIMER
2
Press the CLOCK/TIMER button on the
Remote Control.
The hour digit of the time indication rapidly blinks on
the display.
Press the ¢ or 4 button on the
3
Remote Control to set the hour.
Pressing the ¢ button moves the time forwards and
pressing the 4 button moves it backwards. Hold
down the button to move the time rapidly.
STANDBY/ON
3
PLAY MODE
6
REPEAT
9
FM MODE
10
TREBLE
SET
CANCEL
SLEEP
SLEEP
VOLUME
CLOCK
/TIMER
ON time, OFF time, Source, Volume
SLEEP
SLEEP indicator
4
Press the SET button.
The minute digits of the time indication rapidly blink on
the display.
Press the ¢ or 4 button to set the
5
minute.
6
Press the SET button.
The selected time is set and the seconds start counting
from 0.
CAUTION:
• If there is a power failure, the clock loses its
setting after about 20 minutes. "0:00"
blinks on the display and the clock must be
reset.
• The clock may gain or lose one to two minutes per month.
• The or button operates same as the
button does.
Timer indicator
¢ 4
or
24