Using The Timers - JVC FS-8000J Manual

■ ■

Using the Timers

REMOTE CONTROL RM-RXFS8000
DIMMER
DISPLAY FM MODE
SUBWOOFER
LEVEL PRESET
PROGRAM RANDOM
BASS
MD
/TAPE
VOLUME
The timers let you control listening functions automatically.
Setting the Clock
You can set the clock whether the System is on or off.
Notes:
• The clock must be correctly set for the timers to work.
• The procedure must be completed within two minutes. Otherwise,
the setting is cleared and must be repeated from the beginning.
(for 2 seconds)
■
1. Press the CLOCK button on the Unit for
more than two seconds.
The clock rapidly blinks.
■
2. Press the
4
the time.
Pressing the ¢
the button moves it backwards. Hold down the button to
4
move the time in 10-minute intervals.
■
3. Press the CLOCK button.
The selected time is set and the seconds start counting from 0.
• Each time the hour's digits change from 11 to 12, the dis-
play alternates between AM and PM. (12 midnight is indi-
cated as "AM 12:00" and 12 noon is indicated as "PM
12:00".)
CAUTION: If there is a power failure, the clock
loses its setting after about 20 minutes. The dis-
play shows "AM 12:00" and blinks, and the clock
must be reset.
Note: The clock may gain or lose one to two minutes per month.
Downloaded from: https://www.usersmanualguide.com/
SLEEP POWER
SLEEP
AUX
AUTO
CD
REPEAT
TREBLE CANCEL
VOLUME
GAIN SELECT
UP
SET
DOWN
TUNER
CD
BAND
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
DOWN MULTI CONTROL UP
or ¢ button on the Unit to set
button moves the time forwards and pressing
Timer indicator
SLEEP indicator
BASS PRESET
CONTROL TUNING
POWER
SNZ indicator
Setting the Daily Timer
You can set the Timer whether the System is on or off.
Once you have set the Daily Timer, the timer will be activated at the
same time every day. It can be cancelled and re-activated whenever
you wish.
The Timer indicator on the display shows when the Daily Timer you
have set is in effect.
Note: Perform each setting within 30 seconds. Otherwise, the set-
ting is cleared and the procedure must be repeated from the
beginning.
■
1. Press the POWER button to turn on the Sys-
tem.
■
2. Setting the ON time (Example: PM 12:15).
1. Press the TIMER/SNOOZE button on the Unit.
The Timer indicator lights up and the current ON time
blinks on the display.
2. Press the
want the Unit to come on.
Pressing the
ing the
the button to move the time in 10-minute intervals.
4
¢
CLOCK
TIMER/
SNOOZE
DOWN MULTI CONTROL UP CLOCK
TIMER/
SNOOZE
OPEN/CLOSE
CD
TUNER
AUX MD/TAPE
BAND
VOLUME GAIN SELECTOR
0 dB -6dB -12dB
(After 2 seconds)
¢ or 4 button on the Unit to set the time you
¢ button moves the time forwards and press-
4 button moves the time backwards. Hold down
14