Table of Contents
Advertisement
Usingthe Timers
There are three timers available--Daily
Timer, Recording
Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the
unit. (See "Selting
the Clock"
on page 9.)
UsingDaily Timer
With Daily Timer, you can wake to your favorite music or
radio program.
You can set the timer whether
the unit is on or
off.
HowDaily Timer actuallyworks
The unit automatically
turns on, set the volume level to the
preset level, and starts playing
the specified
source when the
on-time comes
(the O indicator
flashes while the timer is
operating).
Then, when the off-time
comes,
the unit
automatically
turns off (stands by).
Daily Timer works every day unless you cancel it.
• There is a time limit in doing the following
steps. If the
setting is canceled before you finish, start from step I again.
• If you have made a mistake
while setting timer, press
CANCEL/DEMO.
(However,
this does not always work. If
CANCEL/DEMO
does not work, press CLOCK/TIMER
repeatedly
and start from slep 1 again.)
Before you start.,,
• When using a CD as the source toplay:
_Make
sure there is a CD on the currently
selected
disc number
tray.
• When using a tape as the source to play:
_Make
sure that a tape is in the deck whose deck
indicator
(A or B) is lit on the display.
• When using the external
component
as the source to
play:
--Set
the timer equipped
with the external
component
at the same time.
On the unit ONLY:
1
Press CLOCK/TIMER
repeatedly
until "DAILY"
appears on the display.
O indicator
lights up and the DAILY (daily timer)
indicator
starts flashing on the display.
,'-I R T'_.'-,-'
• Each time you press the button,
the clock!timer
setting
modes change as follows:
_r.
DALLY _
ON TIME _
REC
7
(Daily Timer)
1
Canceled _CLOCK_'--
ON TIME _'_
(See page 9)
(Recording
Timer)
2 Press CLOCK/TIMER
again.
"ON TIME" appears
for 2 seconds,
then
the unit enters on-time
setting mode.
=AIL_
3
Set the on-time
you want
the unit
to turn on.
1) Turn the I,,11_1/1_1control to set the hour,
then press SET.
2) Turn the I_1_/1_t
control to set the minule,
then press SET.
"OFF TIME" appears
for 2 seconds,
then
/,_--SEg_T _]
the unit enters off4ime
setting mode.
4 Set the off-time
you want the unit
to turn off (on standby).
1) Turn the l-.4_l/It..t_l control to set the hour,
then press SET.
2) Turn the I_l_/It..t_l control to set the minule,
then press SET.
The unit enters source selecting
mode.
U
! _1k
! _ ....... !
I
25
Advertisement
Table of Contents
