Draytek Vigor600 User Manual page 32

WPA/WPA2
WPA Passphrase
802.1x
Pre-Shared Key
(Static WEP)
Enables the use of Wi-Fi Protected Access (WPA).
Opens the WPA/WPA2 EAP drop-down menu. The
options include: EAP-TLS, EAP-TTLS, PEAP
(EAP-GTC), PEAP (EAP-MSCHAP V2), LEAP ,and
EAP-FAST.
Click on the Configure button to fill in other information.
Refer to later section for detail.
Enables WPA Passphrase security. Click the Configure
button to fill in the WPA Passphrase. Enter 8 to 63
ASCII or 64 hexadecimal characters.
Enables 802.1x security. This option requires IT
administration. Opens the 802.1x EAP type drop-down
menu. The options include: EAP-TLS, EAP-TTLS,
PEAP (EAP-GTC), PEAP (EAP-MSCHAP V2),
LEAP ,EAP-FAST and Host Based EAP.
Click on the Configure button to fill in other information.
Refer to later section for detail.
If the access point that the Wireless Adapter is
associating to has set optional for WEP and the client has
WEP enabled, the item of Allow Association to Mixed
Cells must be set to allow association.
Enables the use of pre-shared keys that are defined on
both the access point and the station.
Click on the Configure button to fill in the encryption
key. For WEP key size 64 bits, enter 5 ASCII or 10
hexadecimal characters. For WEP key size 128 bits,
enter 13 ASCII or 26 hexadecimal characters. For WEP
28