Table of Contents
Advertisement
c. Push the top of
the phone firmly
against the
spring-loaded
antenna
connector in the
cradle, and
rotate the antenna coupler down to latch
the phone into place.
(The phone will slide down slightly as its
bottom connector engages.)
d. Check the bottom end of the phone to
make sure it is securely coupled to the
9570 Portable Dock connector.
Note: If the 9570 Portable Dock has power, it will
turn on and complete a synchronization process
that may take up to 15 seconds. You may also see a
number of power-on messages. (See "Power-On
Messages" on page 38.) When synchronization is
complete, you can use the unit as described in
"Using Your 9570 Portable Dock" on page 33.
4. Lock the phone into the cradle:
a. Insert the key into
the lock on the right
side of the
9570 Portable Dock.
b. Turn the key
clockwise.
Important: 10-Second Rule —After docking the
9500 Portable Phone, wait at least 10 seconds
before undocking it. After undocking the phone,
wait at least 10 seconds before docking it. If you fail
to follow these instructions, the system may not be
ready for normal operation.
Unlocked
Locked
Docking and Undocking the Phone
35
Advertisement
Table of Contents
