Read Me First - Maple Systems OIT 4160B Installation Manual

18
Appendix C
Dimensional Outline
6.00 [152.4]
Toggle
Del
1 2
F4
F1
Alarm
Ack
4 5
F2 F5
Help
7 8
F3 F6
FRONT VIEW
3.00 [76.2]
C L
REAR VIEW
1.46 [37]
BOTTOM VIEW
1010-0105, REV 03
OIT3160B/4160B
4.00
Page
Down
[101.2]
3 0
CLEAR
6
ENTER
9
1.77
[45]
1.60
[40.6]
0.16 [4.1]
SIDE VIEW
INSTALLATION MANUAL

Read Me First!

Your new Maple Systems OIT comes from the factory without any
communications protocol or operational software installed; therefore
The OIT will NOT operate until it has been configured using
•
OITware-200 or STEPware-100.
When power is first applied, the OIT's display will indicate that it
•
needs to be configured.
Use the OITware-200 or STEPware-100 software to create a file
•
(or "project") that can be downloaded to the OIT.
When the project is transferred, both communications protocol
•
and operational software are automatically loaded and the unit is
ready for operation.
To ensure that the OIT meets UL and CE compliance, it is
necessary to follow all installation procedures described in this
manual.
3
1010-0105, REV 03