Programing The Playing Order Of The Tracks -Program Play - JVC UX-A52 Instructions Manual

Jvc micro component system instructions
Hide thumbs Also See for UX-A52:
Table of Contents

Advertisement

Programing the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Load a CD.
2
Press CD 3 / 8, then 7.
The source is changed to "CD."
3
Press PLAY MODE repeatedly until "PROGRAM"
appears on the display.
• Each time you press the button, play mode changes
as follows:
PROGRAM
(Program Play)
(Normal Play)
4
Press the number buttons to select the tracks.
• For how to use the number buttons, see "To go to
another track directly using the number buttons" on
page 19.
CD indicator
Current track number
5
Press CD 3 / 8.
The tracks are played in the order you have programed.
Program Play ends when all the tracks are played once.
To stop during play, press 7.
To exit from Program Play, press PLAY MODE
repeatedly so that the unit enters the other play modes
(Random Play or Normal Play) before or after play.
RANDOM
(Random Play)
Program
number
Total playing
time
Play mode
– 20 –
To check the program contents
Before playing, you can check the program contents by
pressing 4 or ¢.
• 4 : Shows the programed tracks in the reverse order.
• ¢ : Shows tracks in the programed order.
To modify the program
Before or after playing, you can erase the last programed
track by pressing CANCEL. Each time you press the
button, the last programed track is erased from the
program.
To add tracks in the program before you start play,
press the number buttons to select track numbers you want
to add.
To erase the entire program, press CD open/close 0 to
eject the CD.
• Turning off the unit will also erase the program.
If you try to program a 33rd step
"MEMORY FULL" will appear on the display.
If your entry is ignored
You have tried to program a track number that does not exist on the
CD (for example, selecting track 14 on a CD that only has 12
tracks.) Such entries are ignored.
If the total playing time is 100 minutes (one hour
and 40 minutes) or more
The total playing time will not be shown. ("– – : – –" will appear.)
Continued

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux-a52rCa-uxa52Sp-uxa52

Table of Contents