Precautions On Cd Playback; Playing Back The Entire Cd-Normal Play - JVC UX-A52 Instructions Manual

Jvc micro component system instructions
Hide thumbs Also See for UX-A52:
Table of Contents

Advertisement

Precautions on CD Playback

This unit has been designed to play back discs bearing the
following logos:
CD ReWritable (CD-RW)
CD Recordable (CD-R)
Audio CD
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back when they are already
"finalized." If you play back an unfinalized discs,
"UNFINALIZE" appears on the display.
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format ONLY. (If CD-RWs have
been recorded in different format, erase all the data on
CD-RWs completely before re-recording on the discs.)
DO NOT play back CD-Rs or CD-RWs including
the sound files such as MP3.
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player's lens is dirty.
Important notices:
• In general, you will have the best performance by
keeping your CDs and the mechanism clean.
- Store CDs in their cases, and keep them in cabinets or
on shelves.
- Keep the unit's disc tray closed when not in use.
• Continuous use of irregular shaped discs (heart-shape,
octagonal, etc.) can damage the disc rotating mechanism.
• CD-RWs may require a longer readout time. This is
caused by the fact that the reflectance of CD-RWs is
lower than for regular CDs.
Playing Back the Entire CD—Normal Play
You can play a CD.
1
Press CD open/close 0 on the unit.
The unit automatically turns on, the electronic swing
panel slides upward, and the disc tray comes out.
Disc tray
2
Place a CD correctly on the circle of the disc tray
with its label side up.
Good
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press CD 3 / 8.
The disc tray closes, then the electronic swing panel
slides downward automatically.
The CD indicator starts rotating on the display and CD
playback starts from the first track.
• If you press CD open/close 0 again, the disc tray
closes, and the electronic swing panel slides
downward automatically. CD playback does not start
until you press CD 3 / 8.
CD indicator
Current track
number
CD playback stops automatically after playing all the
tracks on the CD.
– 18 –
Continued
No good
Elapsed playing time

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux-a52rCa-uxa52Sp-uxa52

Table of Contents