Grab - NewTek TriCaster 850 User Manual

6. Click Close.
7. Make sure you have an active source playing on Program output.
8. Press the Record button (Figure 60) – it will illuminate, and the neighboring timecode
field will begin keeping track of the duration of your recording.
9. After a little while, press Record again to stop recording.
This configuration will record everything that is displayed on Program Output in this manner,
letting you capture your entire live production for posterity if you like; it also provides a way for
you to capture clips for playback (from TriCaster's DDRs) during your live events.
4.7.2

GRAB

Figure 62
The Grab feature is similar to Record, just described - except of course that it grabs a fresh still
image from Program Output each time you click the Grab button.
Also, in place of an option to add the captured file(s) to a DDR, you may enable an Add to Still
Playlist switch, with the result that every time you click Grab a new image is added to the Still
Media Player.
Page | 65