Record - NewTek TriCaster 850 User Manual

4.7.1

RECORD

Figure 60
1. Click the Configuration button (gear) next to Record (Figure 60).
2. The Record Configuration panel opens (Figure 61).
3. Click in the Base Name field, and enter a unique name for the captured file(s).
Hint: TriCaster stores recordings at (drivename):\Media\Clips\sessionname\Capture (where
"drivename" and "sessionname" are appropriate entries for your system and session).
Figure 61
The default Encoding options and Destination will work just fine for our current purposes, so let's
continue:
4. If necessary, select PGM as the Source to be recorded.
5. You could optionally enable the Add to DDR Playlist switch to automatically add newly
recorded clips to the (currently designated DDR) playlist – but let's not do that yet.
T C EXTREME™
RI ASTER
multiple a/v sources simultaneously. The first of these sources is the Primary source, and
defaults to PGM (Program output). Additional sources in many combinations can be added in a
Secondary recording group shown below. The options are discussed in more depth in Chapter
16, entitled Record and Grab.
Page | 64
With IsoCorder™ technology, TriCaster EXTREME models can capture