Center Frequency; Input Configuration - NewTek TriCaster 850 User Manual

However, if you are supplying an HD reference signal to TriCaster's Genlock Input (and your other
equipment), select the HD (Tri-level) switch in the Reference Type area of TriCaster's Genlock
settings.
Note: Reference Type options do not appear for SD sessions.
7.1.7

CENTER FREQUENCY

This setting is applied when a Genlock reference signal is not in use. To adjust the setting, supply
color bars to an input and pass TriCaster's video output to a downstream vectorscope. The
vectorscope display is completely stable when Center Frequency is properly adjusted.
7.2

INPUT CONFIGURATION

Just as for Program Output, the source monitors also have contextual tools that appear when
you roll the mouse pointer over them. In every case, the right-most button is a Configure button
(gear). Clicking it opens the Configuration panel for a specific source (Figure 136).
Figure 136
Page | 135