Resolve Ivga Pro Quirks; Enable Termination For Video Inputs; Enable Termination For Video Inputs; Sessions - NewTek TriCaster 850 User Manual


If the router supports 5 GHz Radio mode, set it to 802.11a/n.

Channel Settings should be set to 1, 6 or 11 (11 is the most common choice, since it is
the starting channel, making 1 or 6 a good choice).

Channel width should be set to 20 MHz or "Narrow Band" in 2.4 GHz mode.

Channel width should be set to both 20 MHz and 40 MHz in 5 GHz mode.

Ensure that only one DHCP server is active on the network.
Q2: Why do some clips not play properly across an AirPlay® connection?
A: There are several possibilities: First, TriCaster cannot play media governed under Digital
Rights Management (DRM) schemes. This is a common limitation of commercial content.
Otherwise, If an iOS® device loses its connection with the network for any reason, it does not
refresh its AirPlay® destination list for about one hour. It may seem as though the TriCaster is
detected even though the connection has been lost. One way to flush the AirPlay list is to enable
and disable 'Airplane mode' in the device settings. Finally, make sure you are connected to the
correct Wifi network (etc.)
A.1.13 RESOLVE IVGA PRO QUIRKS
Certain antivirus software has been found to interfere with some iVGA PRO features. If you
encounter a persistent quirk, you might try disabling your antivirus protection briefly to see if the
problem disappears. If it does, consider disabling realtime protection while using iVGA PRO; or,
possibly better yet, try using a different anti-malware product.
A.1.14 ENABLE TERMINATION FOR VIDEO INPUTS?
TriCaster has full-time video termination. If you need to loop through (or t-off from) other video
devices (such as an external monitor) prior to TriCaster in your video pipeline, you should ensure
termination is OFF for earlier devices.
A.2 SESSIONS
SUPPLEMENTARY QUESTION:
Q: What is a session?
Page | 290