Transitions - NewTek TriCaster 850 User Manual

2. Add a different title to the playlist for DDR 2 (or Still, for a TriCaster 850).
3. Click the button labeled DSK 1 in
the Utility Delegate group; this
delegates the Utility row to
control the DSK 1 source.
4. Click the Graphics (or Title)
button in the Utility row – note
that the label above the DSK 1
delegate button updates when
you do so.
5. Click the DSK 2 button in the Utility Delegate group, and use the Utility row to assign
DDR 2 as the current source for DSK 2.
4.6.2

TRANSITIONS

Now we're ready now to try out the features in the Transition section, to the right of the
Switcher rows.
Main Layer Controls
Figure 52
As shown in Figure 52, the Transition section is organized into two groups – the main layer
controls at left, with local layer controls at right. The latter group is divided vertically into
individual sections for the BKGD, DSK 1 and DSK 2 video layers.
Page | 58
Local Layer Controls
Figure 51