Setting Up; Command And Control - NewTek TriCaster 850 User Manual

3

SETTING UP

To begin, let's review 'what came in the box':

NewTek TriCaster™

T C 850 EXTREME™
RI ASTER

T C 450 EXTREME™
RI ASTER

Keys to front panel of case

Four attachable rubber feet (for desktop use)

A/C power cable(s)

BNC removal tool (to assist with cable connection and removal)

DVI to VGA adapter

NewTek mouse and keyboard

Quick Start Guide

NewTek 3PLAY™ brochure

Getting Started Training DVD

NewTek iVGA™ CD

NewTek TriCaster registration reminder card

New product letter
3.1

COMMAND AND CONTROL

1. Connect an external computer monitor to the (uncapped) DVI port on the backplate
(labeled Interface on TriCaster 850). For TriCaster 450, use the DVI connector nearest to
the Video In group for the interface monitor connection. (DVI connectors located at left
near the network port are normally capped and should not be used.)
Note: TriCaster's user interface requires a minimum screen resolution of 1440x900.
2. Connect the mouse and keyboard to USB ports on TriCaster.
This chapter explains how to properly connect power, external
control devices, monitors and audio visual sources to your NewTek
TriCaster™ system.
It also reviews registration for warranty purposes and technical
support. After completing this short section, you'll be all set to
continue into the Walkthrough chapter that follows it.
Package of three (3) 2TB hard drives
One 1TB hard drive for the removable drive bay
Page | 19