Table of Contents
Advertisement
Working Instruction Repair Instruction Mechanical/3/000 21-1/FEA 209 544/123, Mechanical
Using a torque driver and a T6 bit, remove the two front
screws.
Insert the tip of a plectrum in the seam between the front
and back covers in the location shown.
The plectrum should be angled so that the tip of it is under
the edge of the front cover.
Slide the plectrum down the seam of the phone until the
latches along that side are released.
: Preliminary
9(65)
State
Rev 4
© Sony Ericsson Mobile Communications AB
Advertisement
Table of Contents
