Working Instruction Repair Instruction Mechanical/3/000 21-1/FEA 209 544/123, Mechanical
Make sure the heat spreader is positioned as shown so that
the two holes in the heat spreader line up with the two
shield can lid contacts.
I
F THE HEAT SPREADER WAS DAMAGED DURING THE REMOVAL
LCD,
.
OF THE
REPLACE THE HEAT SPREADER WITH A NEW ONE
Obtain a new LCD and insert one side of the LCD into its
cavity in the back cover as shown
: Preliminary
24(65)
State
Rev 4
© Sony Ericsson Mobile Communications AB