Working Instruction Repair Instruction Mechanical/3/000 21-1/FEA 209 544/123, Mechanical
Using a nylon pointer, rotate the black bar portion of the ZIF
connector toward the circuit board.
Use the flat end of a nylon pointer to push the LCD flex film
out of its connector toward the LCD.
Use a nylon pointer to release the two latches indicated
from the bottom edge of the circuit board.
Be careful not to damage the latches when releasing
the circuit board. These latches easily break.
Lift the copper portion of the heat spreader up and fold it
toward the LCD.
: Preliminary
13(65)
State
Rev 4
© Sony Ericsson Mobile Communications AB