Switch For Printing Sf Markers; Printer Drivers - Weidmuller SpeedMarking-Laser User Manual

3.5 Switch for printing SF mark-
ers
Figure 15 SF switch
1 Open the cover of the SpeedMarking-Laser.
The switch for printing SF markers is situated here.
If SF marker should be printed, the switch must be
set to "SF 1-6".
If long or high markers are used (e.g. SF
5/21) and the print-out in the last row is not
printed properly, than set the switch also to
"SF 1-6".
5658600000/00/05.07
Basic information of the printer
3.6

Printer drivers

The SpeedMarking-Laser is compatible to the follow-
ing printer types:
• HP III
• HP LaserJet 6P
• HP LaserJet 6P/6MP (recommended)
More information for installation of the
printer driver is available in chapter 2.7
"Installation of printer driver".
17