Operating Panel; Operating Panel Buttons - Weidmuller SpeedMarking-Laser User Manual

3.2

Operating panel

A
B
Figure 13 Operating panel
A Button Job Cancel
B Button Test
C LED Error
D LED Data
E LED Ready
F LED MultiCard
5658600000/00/05.07
(red)
(green)
(green)
(yellow)
3.3

Operating panel buttons

The printer possesses the buttons: Job Cancel (A)
and Test (B).
Job Cancel
Press the button Job Cancel to abort an ongoing
printing job. During deletion of the printer storage,
the LEDs on the operating panel will light up one af-
ter the other. The LEDs will then switch into the
ready mode. This can take some time depending on
the size of the printing job.
If the button Job Cancel has been pressed
C
by mistake, then the job has to be printed
D
again.
E
If the button Job Cancel is pressed during
F
no-load operation, the upper LEDs of the
operating panel will light one after the
other.
Test
• Press the button Test to restart the printing after
the printer has been stopped or data is still stored
in the printer storage (the Data LED and Ready
LED light up).
• Press the button Test in order to delete error mes-
sages of the printer (Error LED lights up).
A
B
Figure 14 Operating panel buttons
A Cancel job
B Test
Basic information of the printer
15