Table of Contents
Advertisement
Printer installation
2.3
Unpacking the printer
Store all packaging material.
In case of repairs you should return the
printer in its original packaging to avoid any
possible damage in transit.
2.4
Insertion of toner cartridge
Figure 6
Opening the upper cover
1 Open the upper cover
2 Remove the transport retainer that is situated be-
low the cover of the SpeedMarking-Laser.
3 Take the toner cartridge out of its packaging.
Figure 7
Removal of toner cartridge out of pack-
aging
10
4
Remove the alignment rod for the roller.
Figure 8
Remove alignment rod for the roller
Caution
To avoid any damages, the toner cartridge
should be exposed to the sunlight only for
a few minutes.
5 Follow for steps 5-6 the instructions on the roller.
Figure 9
Roller
6 Do not position the toner cartridge upside down
and do not shake it.
5658600000/00/05.07
Advertisement
Table of Contents
Troubleshooting
