Routing Of Incoming Calls - Nera WorldCommunicator Getting Started Manual

GETTING STARTED

Routing of incoming calls

When applying for IMN numbers, a Terminal Id
(OID/DID) is received from the Net service provider.
If not programming the Terminal Id and the corre-
sponding MSN into the WorldCommunicator, all
periferal devices with the appropriate service will
respond to incoming calls.
To make an incoming call reach a particular device,
an MSN number and the Terminal Id "connected" to
the IMN number must be programmed into the
Modem Unit. The same MSN number must then be
programmed into the device.
The table below lists valid MSN numbers for the
available services for ISDN and DECT devices.
DECT PHONE
4.8/64 kbps speech
Term.Id/4.8 Term.Id/64 MSN
X 9X 01
X 9X 02
X 9X 03
X 9X 04
X 9X 05
X 9X 06
X 9X 07
X 9X 08
X 9X 09
X 9X 10
X 9X 11
X 9X 12
Nera WorldCommunicator
LIST OF VALID TERMINAL IDs AND MSN NUMBERS
ISDN PORT (PHONE)
4.8kbps speech 64kbps speech
Term.Id MSN Term.Id MSN
1* 20* 91*
X 21 9X
X 22 9X
X 23 9X
X 24 9X
X 25 9X
X 26 9X
X 27 9X
X 28 9X
* Preprogrammed
ADDITIONAL DEVICES
Numbers to be programmed:
In ISDN/DECT device:
MSN number
For an easy start, the first Terminal Id and MSN
number have been preprogrammed into the Modem
Unit (marked with a star in the table).
In the 4.8 and 64 kbps speech table the Term.Id is
represented by an X, allowing an ISDN Term.Id or a
DECT Term.Id to be used as required.
Note! A Term.Id that already has been entered for
DECT or ISDN is not accepted.
ISDN/RS-232/USB PORTS
64 kbps data
Term.Id MSN
30* 51* 60*
31 52* 61*
32 53* 62*
33 54 63
34 55 64
35 56 65
36 57 66
37 58 67
38 59 68
51/60, preset for ISDN port
52/61, preset for RS-232 port
53/62, preset for USB port
CONT
In Modem Unit:
MSN number
and Terminal Id
(the Terminal Id is paired with
a specific IMN number)
ISDN PORT
3.1kHz audio 56 kbps data
Term.Id MSN Term.Id MSN
61* 40* 71*
62 41 72
63 42 73
64 43 74
65 44 75
66 45 76
67 46 77
68 47 78
69 48 79
3.1 kHz /
64 kbps
audio service
'
D
50*
51
52
53
54
55
56
57
58
23