Replacing The License Plate Light Bulb - Yamaha MT09 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
6
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing the license plate
1
light bulb
1. Remove the license plate light unit
by removing the nuts and collars,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
[ECA11192]
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
EAU58010
3
2
4
3
2
6-37
1. License plate light bulb
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars and nuts.
1