Yamaha MT09 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
To switch between the average fuel
consumption displays, push the "SE-
LECT" button for one second when
one of the displays is shown.
To reset the average fuel consumption
display, select it by pushing the "SE-
3
LECT" button, and then push the "RE-
SET" button for at least one second.
TIP
After resetting an average fuel con-
sumption display, "_ _._" is shown for
that display until the vehicle has trav-
eled 1 km (0.6 mi).
Coolant temperature display
1
1. Coolant temperature display
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message "HI" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 6-45.)
TIP
 When the coolant temperature is
below 40 °C, "LO" will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Air intake temperature display
1
1. Air intake temperature display
3-11
The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case.
This display shows the air intake tem-
perature from –9 °C to 99 °C in 1 °C in-
crements.
TIP
 –9 °C will be displayed even if the
air intake temperature falls below
–9 °C.
 The air intake temperature may
vary from the ambient tempera-
ture.
Self-diagnosis device
1
1. Error code display
2. Engine trouble warning light "
3. Immobilizer system indicator light "
2
3
"
"