Setting The Day And Time - Telstra V1600 SMS Colour Screen User Manual

7 Getting started
Battery performance
To keep your batteries in the
best conditions, leave the
handset off the base for a few
hours at a time (after the initial
16 hour charge).
Please note however, that new
NiMH batteries do not reach full
capacity until they have been in
normal use for several days.
Running the batteries right
down a least once a week will
help them last as long as
possible.
The charge capacity of
rechargeable batteries will
reduce with time as they wear
out, so reducing the
talk/standby time of the
handset.
Eventually, they will need to be
replaced. New batteries can be
obtained from your nearest
electrical retailer.
Helpline
If you have any difficulties
setting up your Telstra V1600,
please call Product Information
on 1300 302 699.
Downloaded from www.Manualslib.com

Setting the day and time

If you have subscribed to Telstra's Calling Number
Display* service, the time and date will be set
automatically when you receive your first call. You
can also set the time manually.
1. On the handset, press Menu. Press
2. Enter the date, e.g. 02 05 for 2
3. Enter the time, e.g. 10 45 for 10:45am. Press OK.
4. Press and hold Back to return to standby.
Your Telstra V1600 is now ready to use.
*Excludes blocked calls. Monthly charges apply.
Available in most areas.
manuals search engine
down to
Time settings
to
Set Date & Time
This overwrites the current setting. If you make a
mistake press Clear to delete. Press OK.
to scroll
then press OK. Scroll
then press OK.
nd
May. Press OK.