Table of Contents
Advertisement
COOL/HEAT/DRY/FAN mode operation procedure
HI POWER
ECONO
AUTO
AM
HI
MED
LO
ON
OFF
FAN SPEED
MODE
HI POWER TEMP ECONO
AIR FLOW
TIME
CANCEL
ON
OFF
RESERVE
TIMER
TIME
ACL
Air flow direction adjustment procedure.
NOTE
• The air is not blown out during the operation.
Page 17
Concerning high power operation
Pressing the high power button intensifies the operating power and initiates a powerful cooling or heating operation for 15 minutes continuously.
The remote controller
"HI POWER"
L
NOTE
• During the high power operation, the room temperature is not con-
trolled. When it causes an excessive cooling or heating, press the
high power button once more to cancel the high power operation.
• High power operation is not available during the dehumidifying
operation.
• During ON timer operation, HI POWER operation will start when
the ON time is reached.
Concerning economy operation
Pressing the economy button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or heating. The unit operates
1.5°C higher than the setting temperature for the weak wind capacity during cooling or 2.5°C lower than that during heating. A message
displayed on the remote controller. The wind capacity display is erased.
NOTE
• If the economy operation is selected while operating with the
strong or medium wind capacity, it takes about 1 minute before the
wind capacity drops to the weak level.
1
2
3
4
Page 10
illuminates but the wind capacity display is erased.
Aim the remote control at the air conditioner.
Press the ON/OFF button.
Press the MODE select button.
Move the [
mark] to the desirable operation position.
ZD, HD type:
(Cool),
CD type:
(Cool),
Press the TEMP button.
Press
or
button for the desired temperature.
Standard
26°C~28°C
22°C~24°C
Press the FAN SPEED button
Set the air flow rate as desired.
To stop:
Program changing procedure
Set the new program.
• The operation program can also be set or changed when
the air conditioner is not in operation.
• When the following operations are conducted HI POWER opera-
tion will be canceled.
1 When the HI POWER button is pressed again.
2 When the operation mode is changed.
3 When ECONOMY operation is conducted.
• When the following operations are conducted ECONOMY opera-
tion will be canceled.
1 When the ECONOMY button is pressed again.
2 When HI POWER operation is selected.
– 9 –
(Heat),
(Dry)
(Fan),
(Dry)
21°C~24°C
Press the ON/OFF button.
"ECONO"
is
L
Hide quick links:
Advertisement
Table of Contents
