Starting The Windows Service - HP 800 User Manual

Remote Device Activity Capture
Creating a DAC Host
NOTE:
12-14
b. When the command completes, copy the DAC_keystore file (from /
tmp or wherever you specified) to C:\Program
Files\HP\DAC\lib\ .
c. After copying the DAC_keystore file from the MS, delete the file
from its temporary location on the MS.
Note that for each remote DAC host, this step must be repeated as each host
should have its own unique key.
2. Add a firewall rule to the ES or ESs to which the DAC host will be sending
packets. On each ES:
a. Enter the following command to dump the Lokkit iptables chain:
iptables -nvL RH-Lokkit-0-50-INPUT --line-numbers
b. Add a rule AFTER the RELATED, ESTABLISHED rule. The rule
numbers are listed in the first column of the output from the previous
statement. For example, if the RELATED, ESTABLISHED rule is rule
5, the INSERT command would look like the following:
iptables -I RH-Lokkit-0-50-INPUT 6 -p tcp --dport
8999 -s <DAC host IP> -m state --state NEW -j ACCEPT
If you want this addition to survive a reboot, you must use the
iptables-save command and dump the iptables ruleset to /etc/
sysconfig/iptables with the following command:
/sbin/iptables-save > /etc/sysconfig/iptables

Starting the Windows Service

You can start the Windows service manually, or you can reboot the Windows
server, which starts the service automatically.
To start the Windows service manually:
Windows server