Untestable Endpoints And Dhcp Mode - HP 800 User Manual

Network access controller 800
Hide thumbs Also See for 800:
Table of Contents

Advertisement

NOTE:
TIP:

Untestable Endpoints and DHCP Mode

If you have an endpoint that does not have a supported operating system, you
can allow access or quarantine the endpoint. The current supported operating
systems are listed in "Endpoints Supported" on page 5-5.
If you allow an untested endpoint to have access, there are several important
items to keep in mind.
The IP address granted by your DHCP server has a lease expiration period
that cannot be affected by the NAC 800 server. Once an untested endpoint has
been allowed access and assigned a non-quarantined IP address by your DHCP
server, that endpoint has continual access through that IP address until the IP
address lease expires. For example, you are not be able to quarantine that
endpoint (or affect any other action on that endpoint) with NAC 800 until the
lease expires. It is not unusual for system administrators to set a lease
expiration time of three or more days.
The access status column on the Endpoint activity window shows unable to
quarantine, and the action cannot complete until the IP address lease expires.
It is strongly recommended that if you are going to allow untested endpoints
on your network, you set extremely short lease times (use hours rather than
days) on your DHCP server.
This process results in the following condition for an untested endpoint:
When new end-users log in for the first time, are tested, and are allowed access,
there is up to a three-minute delay between the time the NAC 800 server
determines that they are allowed access and the point at which they are
actually allowed access, potentially causing concern to the end-user. This
uncertainty is due to the three-minute lease on the temporary quarantined IP
address assigned during the initial login process. Once the lease expires (in at
most, three minutes), a new IP address (the non-quarantined IP address) can
be assigned and access is actually granted.
To define access settings for non-supported operating systems, see "Defining
Non-supported OS Access Settings" on page 6-18.
Quarantined Networks

Untestable Endpoints and DHCP Mode

7-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve nac 800

Table of Contents