Your DAC host can be a Windows server. This section provides instructions
on setting up a Windows host.
First, download the executable file to your Windows server, then run the
installer to install the first interface. For this release, if you want to add
additional interfaces, you must install them manually. A future release will
expand the options in the installer to include multiple interfaces. Add any
additional interfaces and start the service.
Downloading the EXE File
To download the EXE file to a Windows machine:
Browser window
Download and save the EXE file to a Windows machine. The EXE file can be
downloaded directly from the MS:
http://www.procurve.com/nactools/
Running the Windows Installer
The Windows installer performs the following tasks:
■
Installs the DAC software
Installs the JavaJRE software if needed
■
■
Installs the WinPcap software if needed
■
Modifies the wrapper.conf file
Installs DAC as a Windows service
■
To run the Windows installer:
Windows server
1.
Navigate to the EXE file downloaded in "Downloading the EXE File" on
page 12-3.
Remote Device Activity Capture
Creating a DAC Host
12-3