Setting 802.1X Devices Logging Levels; Setting Idm Logging Levels - HP 800 User Manual
Network access controller 800
Hide thumbs
Also See for 800:
- User manual (586 pages) ,
- Manual (106 pages) ,
- Installation manual (34 pages)
Table of Contents
Advertisement
CAUTION:
CAUTION:
•
debug – Log debug-level and above messages only
•
trace – Log everything
Setting the log level to trace may adversely affect performance.
Click ok.
2.
Setting 802.1X Devices Logging Levels
You can configure the amount of diagnostic information written to log files
related to 802.1X re-authentication, ranging from error (error-level messages
only) to trace (everything).
To set 802.1X logging levels:
Home window>>System configuration>>Logging
1.
To configure the amount of diagnostic information written to log files
related to 802.1X re-authentication, select a logging level from the 802.1X
devices drop-down list:
•
error – Log error-level messages only
•
warn – Log warning-level and above messages only
•
info – Log info-level and above messages only
•
debug – Log debug-level and above messages only
•
trace – Log everything
Setting the log level to trace may adversely affect performance.
2.
Click ok.
Setting IDM Logging Levels
You can configure the amount of diagnostic information written to log files
related to IDM, ranging from error (error-level messages only) to trace (every-
thing).
To set IDM logging levels:
Home window>>System configuration>>Logging
System Configuration
Logging
3-117
Advertisement
Chapters
Table of Contents
