Resetting Your Test Data - HP 800 User Manual

System Administration
System Settings
15-10

Resetting your Test Data

There are times when you may wish to revert to the as-shipped state for test
data; clearing the database of all endpoints and test results, and resetting
SAPQ and DHCP leases.
To reset your test data to the as-shipped state:
Command line window
1. For single-server installations:
a. Log in as root to the NAC 800 MS, either using SSH or directly with
a keyboard.
b. Run the script by entering the following at the command line:
resetTestData.py
2. For multiple-server installations:
a. Stop the nac-es service on all ESs:
i. Log in as root to each NAC 800 ES, either using SSH or directly
with a keyboard.
ii. Enter the following at the command line:
service nac-es stop
b. Stop the nac-ms service on the MS:
i. Log in as root to the NAC 800 MS, either using SSH or directly
with a keyboard.
ii. Enter the following at the command line:
service nac-ms stop
c. Run the script on each ES:
i. Log in as root to each NAC 800 ES, either using SSH or directly
with a keyboard.
ii. Enter the following at the command line:
resetTestData.py
d. Run the script on the MS:
i. Log in as root to each NAC 800 MS, either using SSH or directly
with a keyboard.