b. Select the Turn on file sharing radio button.
Click Apply.
c.
d. Click Continue on the User Account Control pop-up window.
e.
Click Yes, turn on file sharing for all public networks.
TIP:
If the endpoint has connected to the network successfully at one time, but
has trouble accessing services later, the endpoint may have been quarantined
and the network discovery, file sharing, and printer sharing may have been
disabled. Check these settings as part of any troubleshooting process.
To add your domain controller to the accessible services list:
Home>>System configuration>>Accessible services
1.
Enter the following information in the Accessible services text field:
•
<DC IP Address>:135
•
<DC IP Address>:1025
Where:
<DC IP Address> is the IP address for your Domain Controller
2.
Click ok.
Ports Used for Testing
You might need to configure some firewalls and routers to allow NAC 800 to
access the following ports for agentless testing:
■
137
138
■
■
139
445
■
TIP:
See "Ports used in NAC 800" on page E-1 for a complete description of the
ports used in NAC 800.
Allowing the Windows RPC Service through the Firewall
If end-users enable the XP SP2 Professional firewall, they need to change the
configuration to allow the agentless testing.
End-user Access
Windows Endpoint Settings
5-15