Table of Contents
Advertisement
4. Setting motherboard's jump wire and inserts
The user should note that all receptacles are marked with PIN1. The
symbol "#" indicates the ex-factory default value of the motherboard.
1) SATA1/SATA2/SATA3/SATA4 (Serial ATA wire-harness receptacle)
Serial ATA receptacle can offer a transmission speed of 300MB/sec.
You can connect the Serial ATA devices to this receptacle.
2) CPU_FAN1/SYS_FAN1(CPU fan's receptacle)
This receptacle can be used for connecting CPU/system fan.
Its pins' function are defined below. The user shall make sure
the fan is conforming.
Note
9
Advertisement
Table of Contents
