Table of Contents
Advertisement
Bootup Num-Lock
(To set the state of Num Lock). Options are OFF and ON. In other
words, this item can be used for setting the state of Num Lock for the
time the system has been started. It can be set on the basis of the needs
of the user and poses no influence on the performance of the computer.
PS2 Mouse Support
To set whether the system can support PS2 mouse. The options are
[Auto] and [Disable]. The default value is Auto.
Wait for F1 if any Error
(The system waits the user to press F1 if any error occurs from the
computer). The options are Disable and Enable. Normally, it is set as
Enable. Then if the computer has any error, a line of English words will
appear on the screen, reminding the user of pressing F1 to enter CMOS
for setup. If it is set as Disable, that line of English words won't
appear. However, if the words "wait..." appear during the start up
process and you press Del, the system can also enter CMOS for setup.
Hit "Del" Message Display
(Information is displayed when the computer is started, suggesting the
user can press "Del" to enter the state for CMOS setup). The options
are [Disable] and [Enable]. Normally, [Enable] is selected. After [Enable]
is selected, the information on how to enter the state for CMOS setup
will be displayed at the time the computer is started. If [Disable] is
selected, such information won't be displayed. However, if you press
"Del" when the character "Wait......" appears at the time the com-
puter is started, the system can also enter the state for CMOS setup.
Interrupt 19 Capture [Disable]
If you use some PCI extension cards with built-in firmware program
(like SCSI extension card) and you want to start the system through
Interrupt 19, you can set this item as [Enabled]. The options are
[Disabled] and [Enabled].
Boot Device Priority
To enable the priority order for setup.
Hard Disk Drives
To enable the order setup for hard disk.
Removable Drives
To enable the order setup for removable memory devices.
CD/DVD Drives
To enable the order setup for CD/DVD memory devices.
24
2
Advertisement
Table of Contents
