Power On by Ring
If an external modem is connected to the system, this feature allows an
incoming call to power up the system in soft-off mode.
Resume by Alarm
This feature allows a network activity to power up the system in soft-off mode.
** Reload Global Timer Events **
This group of items specify the I/O event that will reset the timer for entering a
low power mode. The system will remain alert for the activity of the device
which is configured as Enabled. If you do not want a certain device activity to
affect the timer, select Disabled for that device.
PnP/PCI Configurations
The "PnP/PCI Configurations" category allows you to configure the PnP/PCI bus
system. PnP (Plug and Play) allows automatic allocation of the IRQ channel,
memory address and I/O address for your system so that manual selection is
not necessary. PCI (Personal Computer Interconnect) is a system which allows
I/O devices to operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components.
NOTE: This setup menu is for technicians or advanced users only. You
are not advised to change the default settings.
Frequency/Voltage Control
This option is used to set the bus clock ratio for CPU.
31