Table of Contents
Advertisement
3.3.3. IO Chipset Configure
Figure 3.5
Serial Port 1 Address
To set the built-in serial port 1 (COM1 port). The options are:
Disabled, 3F8/ IRQ4, 2F8/ IRQ3, 3E8/ IRQ4, 2E8/ IRQ3 and
Auto. The default value is "3F8/IRQ4".
Serial Port 1 Mode
If this mode is set as Normal 1, it will be used for the mouse and
modem. If IR device is available (IrDA), it is recommended this
item be set as IrDA ADKIR.
Parallel Port Address
To set the address for the parallel port.
Parallel Port Mode
To select the transmission mode for the parallel port (ECP/EPP/
Normal). The default mode is "Normal".
Parallel Port IRQ
To set the parallel port IRQ. It is recommended this item be set
as 7.
20
2
Advertisement
Table of Contents
