Table of Contents
Advertisement
3.6 Security Setup
Figure 3.9
If this function is selected, the following information will appear:
Enter New Password hhhhhh
Then, enter the password with not more than eight characters and press <Enter>.
BIOS will require entering the password again. Once you enter it again, BIOS will
save the set password.
Once the password item is enabled, you will be required to enter the password each
time before the system goes to the set program of BIOS. The user can set this
item through the Security Option in advanced BIOS properties. If the item
Security Option is set as System, the password will be required to be entered before
the system guides and goes to the set program of BIOS. If set as Setup, the
password will be required to be entered only before the system goes to the set
program of BIOS.
To delete the password, press <Enter> in the popped-up window that requires to
enter the password. Then, information for confirmation will appear on the
screen to allow you decide whether the password is disabled. Once the password is
disabled, you won't have to enter the password and can enter the setup program
directly when the system is restarted.
Boot Sector Virus Protection
This item is used for setting the alarm function in the case of virus attack in IDE
disk sector. If this item is set as Enable and some program wants to write informa-
tion in the sector, BIOS will display alarm information on the screen and buzz.
25
4
Advertisement
Table of Contents
