How The Petsafe Bark Control Collar Works - Petsafe Bank Control Operating Manual

How the PetSafe
The PetSafe ® Bark Control Collar
shorten the training phase and promote good behavior.
First, the Bark Control Collar has a unique patented sensor that provides
the most reliable bark detection available. The Bark Control Collar uses both
vibration and sound sensors (dual-detection) to discriminate each bark from
other external noises. A Static Correction is administered through the Contact
Points only if both the vibration from the vocal chords and the sound from the
bark match the same criteria.
Second, the Bark Control Collar has a new patent pending Temperament
Learning System design that is effective across many dog breeds and their
individual barking behaviors. The Temperament Learning System contains
software that tracks the number of corrections needed to substantially reduce
(and in most cases eliminate) the number of nuisance barks.
The system has 10 levels of Static Correction. It begins with low-level
corrections, however, if excessive barking continues the correction intensity will
increase with each successive bark until the barking stops. Once the dog has
learned to reduce the barking, the initial warning corrections are reduced. As a
built-in safety feature, if your dog barks 15 times or more within a 1 minute 20
second period, the Bark Control Collar will automatically shut off for 3 minutes.
Important:
• Never leave the Bark Control Collar on your dog for more than 12
consecutive hours.
• DO NOT use the Bark Control Collar with any additional collars, tags,
leashes or other items that may cause a false correction. Note: The
enclosed ID Tag Ring can be worn on the Bark Control Collar as pictured
on page 7.
• Your dog may wear a harness for attaching a leash and/or tags while using
the Bark Control Collar.
4
Bark Control Collar
®
™ has two primary features designed to
1-800-732-2677
Works
™
_