Connecting The Speakers; Connecting The Center Speaker And Rear Speakers - JVC MX-D602T Instructions Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the System.
Connecting the Center Speaker and
Rear Speakers
Connect the center speaker and rear speakers.
Right Speaker
IMPORTANT: Use speakers with the correct impedance only.
The correct impedance is indicated on the back panel.
CAUTION: If a TV is installed near the speakers, the TV may
display irregular colors. In this case, set the speakers away from
the TV.
RIGHT REAR
SPEAKER
SPEAKERS
FRONT
RIGHT LEFT
+ +
– –
CENTER
SPEAKER
RIGHT LEFT CENTER
REAR
LEFT REAR
SPEAKER
Left Speaker
5