Using The Cassette Deck (Playing) - JVC MX-D602T Instructions Manual

Using the Cassette Deck
(Playing)
FM AM POWER
PRO LOGIC 3CH LOGIC TEST TONE SHIFT
CENTER
– +
LEVEL CENTER MODE SLEEP
REAR
SOUND
– +
LEVEL DELAY TIME MODE
L BALANCE R S.A.BASS
FM MODE
TAPE A TAPE B DIRECTION REPEAT
DISC 1 DISC 2 DISC 3
CD CONTROL TAPE CONTROL
AUX
REC PAUSE
+
VOLUME
–
Pressing TAPE CONTROL
makes the Remote Control
RM-SED602TU REMOTE CONTROL
ready for the Cassette Deck
operations.
Display
When the System is being used, the display shows other items
as well. However, we have only shown the items described in
this section.
TAPE CONTROL
26
Cassette Deck
control buttons
MULTI CONTROL
0 Eject (Deck A)
The Cassette Deck allows you to play, record and dub audio tapes.
With Automatic Tape Detection, you can listen to Type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
Entering the TAPE Operation Mode with the Remote Control
Pressing TAPE CONTROL makes the Remote Control ready for the Cassette Deck operations.
Operate the Cassette Deck with 3, 7 and MULTI CONTROL.
The explanation provided in "Using the Cassette Deck" section assumes that the Remote Control has been
put into Cassette Deck operation mode. When you use the Remote Control, press TAPE CONTROL first.
DISC
DISC
DISC
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the
selected tape deck will use for playback.
During playback, the direction indicator flashes slowly.
During fast left or fast right, the indicator flashes quickly.
During Music Scan mode, the indicator flashes slowly and
quickly alternately.
: Reverse Mode indicator
: Tape Direction indicator
: DECK A, B indicator
PROGRAM
/RANDOM
REPEAT
EDIT
MULTI CONTROL
TAPE ™ £
When TAPE is selected
as the source, the button
lights up.
7 STOP
REVERSE MODE
DECK A/B
0 Eject (Deck B)