Connecting The Fm Antenna; Connecting The Am Antenna - JVC MX-D602T Instructions Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System,
connecting cord and the AC power cord.
1
4

Connecting the FM Antenna

Using the Supplied Wire Antenna
Using an FM 75-Ohm Antenna Cable (not supplied)
If reception is poor, connect the outside antenna.
Before attaching a 75-ohm coaxial lead (the kind with a round wire going to an outside antenna),
disconnect the supplied FM Wire Antenna.

Connecting the AM Antenna

AM Antenna Wire (not supplied)
Note: Even when connecting
an outside AM antenna,
keep the indoor AM loop
connected.
AM Loop Antenna
2 3
Extend the supplied FM Wire Antenna
horizontally.
FM Wire Antenna
Outside FM Antenna Wire
2
1 3
If reception is poor, connect the outside antenna.
Turn the loop until you
have the best reception.
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.