Playing Back Discs; Playing Back The Entire Disc-Normal Play - JVC Micro Component System SP-UXH9 Instructions Manual

Jvc micro component system instruction manual
Hide thumbs Also See for Micro Component System SP-UXH9:
Table of Contents

Advertisement

Playing Back Discs

This unit has been designed to play back the following
discs—CD, CD-R, and CD-RW.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played only if they are already
"finalized."
• Usually you can play back your original CD-Rs or CD-
RWs recorded in music CD format. However, sometimes
they may not play depending on their characteristics or
recording conditions.
• Before playing CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• Some CD-Rs or CD-RWs may not play on this unit because
of their disc characteristics, damage or stain on them, or if
the player's lens is dirty.
• CD-RWs may require a longer readout time. This is
because the reflectance of CD-RWs is lower than for
regular discs.
General notes
In general, you will have the best performance by keeping
your discs and the mechanism clean.
• Store discs in their cases, and keep them in cabinets or on
shelves.
• Keep the unit's disc trays closed when not in use.
Continued use of irregular shape discs (heart-shape,
octagonal, etc.) can damage the unit.
Playing Back the Entire Disc—Normal Play
1
Press 0 OPEN on the unit.
The disc cover opens.
• You can insert a disc while listening to another source.
2
Place a disc correctly with its label side up.
Good
3
Close the disc cover gently.
13
Not good
4
Press CD.
The unit automatically turns on and the
source changes to the CD player.
After loading the disc, total track number and
total playing time appear on the display.
Total track number Total playing time
5
Press CD 3/8.
The first track of the disc starts playing.
Current track number
Elapsed playing time
• The disc automatically stops when the last track has
finished playing.
To stop playing, press 7.
To remove the disc, press 0 OPEN on the unit.
• If the disc cannot be read correctly (because it is scratched,
for example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no disc is inserted
"NO DISC" appears on the display.
DO NOT try to open the disc cover by hand as it
will be damaged.
CD
CD

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca-uxh9Ux-h9Sp-uxh9

Table of Contents